Team Leader/Technical Leader
| Location: |
Chennai |
| Education: |
UG - B.Tech/B.E. - Computers, Electrical, Electronics/Telecomunication PG - M.Tech - Any Specialization, Computers, Electrical, Electronics/Telecomunication,M.S/M.D - Any Specialization |
| Industry Type: |
Software / EDP |
Job Description
Device Driver Development
Requirements:
• Must have 5+ years of experience in embedded development
• Experience with MIPS/PPC / Embedded Intel processors is desired
• Should be experienced with NetBSD and/or Linux
• Need to have solid C programming experience
• Experience working with u boot, BIOS, EFI, GRUB, GPXE
• Experience with PCI(e)/Ethernet/I2C/USB/Compact Flash/SD Flash/Optics
• Have a good knowledge of Ethernet technology – 1G/10G/40G including the MAC and PHY
• Experience working on Broadcom, Marvel, Fulcrum switch ASICs
• Experience in bringing up new 1G/10G Ethernet switch platforms from scratch
• Experience with Broadcom (or other similar vendor's) SDK
• Must have strong trouble shooting skills, and experience with tools like ICE, Code Warrior
• Good understanding of virtualization and writing para-virtualized drivers
• Experience working on fabrics and chassis based products
• Ability to quickly understand system requirements, estimate efforts required and be the technical point of contact for the team
• Proven experience leading teams for development of new platforms, working effectively with HW team during system specification, integration and bringup
Strong ability in hands-on debug
Protocol Software Engineer
Skills / Expertise:
• Must have 5+ years of experience in developing software for routers/switches or equivalent combination of education and work experience.
• Thorough understanding of Layer 2 networking technologies (IEEE 802.3 Ethernet, 802.1D bridging, 802.1Q VLAN and related technologies)
• Must have thorough understanding of IP routing protocols and concepts involving RIP, OSPF/IS-IS, BGP
• Prior development experience with Spanning Tree Protocols (STP, MSTP, RSTP, PVST)/Link Aggregation (LACP)/ 802.1x
• Must have prior software development or maintenance experience with OSPF/IS-IS
• Experience with Data Center Bridging, Virtual Switching, TRILL, SPB and related standards is a strong plus
• Experience working with Broadcom/Dune network processors is a strong plus
• Strong C coding skills, with emphasis on writing scalable code
• Must have strong debugging and troubleshooting skills
• Should have worked on Operating Systems such as NetBSD/Linux /Vxworks
Multicast Test Engineer
Requirements:
• Must have 5+ years of experience in testing of systems software for IP routers/Ethernet switches or equivalent combination of education and work experience.
• Excellent understanding of Ethernet and TCP/IP protocols
• Experience in testing Layer2 protocols such as STP
• Good understanding / experience with Layer3 protocols such as OSPF and BGP
• Experience in testing multicast protocols like IGMP/IGMP Snooping, PIM-SM, PIM-SSM, MLD, MSDP
• Experience in testing of advanced implementations like PIM-Sparse-Dense Mode, PIM-Snooping, PIM-Bidirectional will be an added advantage
• Experience in using third party test equipment like IXIA
• Hands on experience in scripting languages/tools such as TCL, Expect, Perl
• Hands on experience with Cisco and Juniper switches and routers.
• Cisco, Juniper certifications are an added advantage
• Must have experience in test case planning/development and good communication skills (oral & written) in order to work with teams in multiple locations.
• Ability to analyze requirements and communicate well with others to
O get clarity on the requirements
o identify relevant areas to be tested
o identify relevant 3rd party tools/applications required to carry out tests
o monitor and report status clearly and concisely
Protocol Test Engineer
Requirements:
• Must have 5+ years of experience in testing of systems software for IP routers/Ethernet switches or equivalent combination of education and work experience.
• Excellent understanding of Ethernet technologies, IPv4, IPv6 and TCP/IP protocols
• Experience in testing protocols like 802.1Q, 802.1p, STP, RSTP, MSTP, QinQ, LACP, RSPAN, GVRP
• Experience in testing protocols like OSPFv2, OSPFv3, BGP, ISIS and BFD
• Experience in platforms supporting in Non-stop-forwarding/Hit-less protocol support
• Hands on experience with Cisco and Juniper switches and routers
• Experience in using third party test equipment like IXIA, Spirent TestCenter, N2X.
• Hands on experience in scripting languages/tools such as TCL, Expect, Perl
• Cisco and Juniper certification is an advantage
• Experience in test case development, good communication skills (oral & written) and the ability to work with teams in multiple locations is required
• Ability to analyze requirements, communicate well with multiple teams to
o get clarity on the requirements
o identify relevant areas to be tested
o identify relevant 3rd party tools/applications required to carry out tests
o monitor and report status on the progress.
IPv6 Test Engineer
Requirements:
• Must have 5+ years of experience in testing of systems software for IP routers/Ethernet switches or equivalent combination of education and work experience.
• Excellent understanding of Ethernet technologies and, IPv4, IPv6, and TCP/IP
• Experience in testing protocols like, OSPFv3, BGPv4, ISISv6,VRRPv3
• Hands on experience with Core IPv6 features – RAD, NDP.
• Hands on experience with ipv6 ACLs.
• Exposure to IPV6 Conformance suites, Ipv6 ready logo testing will be a plus.
• Hands on experience on Cisco and Juniper switches and routers
• Experience in using third party test equipment like IXIA, Spirent TestCenter,
• Hands on experience in scripting languages/tools such as TCL, Expect, Perl
• CCIE certification is added advantage.
• Must have experience in test case planning/development and good communication skills (oral & written) in order to work with teams in multiple locations.
• Ability to analyze requirements, communicate well with multiple teams to
o get clarity on the requirements
o identify relevant areas to be tested
o identify relevant 3rd party tools/applications required to carry out tests
o monitor and report status on the progress.
FCOE : Min 5+yrs
Description:
Candidate will be a member of the Layer 2 Switching Protocols development team and will be working in the development of converged Ethernet Products
Requirements:
* Must have Good experience developing software for networking/storage products
* Must have a thorough understanding storage networking architectures based on Fibre Channel technology and protocols
* Should be well versed with various FC/FCoE standards and protocols such as FCP, FCF, FSPF, etc.
* Must have prior work experience in developing or maintaining Fibre channel protocol components
* Familiarity/experience with Fibre Channel over Ethernet (FCOE) is highly desirable
* Must have strong development experience in Netbsd/Linux
* Strong coding skills in C
Company Profile
Leading Network / Datacom Domain Company in Chennai.
| Experience: |
5 - 10 Year(s) |
If interested please send me your updated profile , and you can also refer your friends
Contact Details
| Company Name:
|
MANPOWER SERVICES INDIA PVT. LTD. |
| URL: |
|
| Contact Person: |
|
| Email: |
kiran.manepalli@manpower.co.in |
| Telephone: |
|
| Job Reference: |
CJS-Adv-20115 |
| Job Posted Date: |
06th Dec 2011 |
